What are the prerequisites for installing and using electric curtains?

A method for installing and using electric roller blinds

1. Avoid placing items in the direction of operation of electric roller blinds.

2. The maximum indoor use distance of two concrete walls is 20 meters, and the maximum outdoor use distance of the remote control is 200 meters.

3. If the remote control cannot be used Roller Shadenormally, first ensure that the battery is properly installed and that the voltage is normal, and then replace the battery as soon as possible.

4. Close the doors and windows near the roller shutter ahead of time if the weather is bad.

5. When cleaning an electric roller shutter, it is best to use water or a neutral cleaning agent; alkaline or acidic solvents should not be used.

6. The electric rolling shutter installation motor has an overheating protection device and a positioning switch to prevent misuse and thermal overload, so it is best not to run or start for an extended period of time.

Second, instructions for installing and commissioning electric rolling shutters.

1. Start the tubular motor and determine the direction of rotation. When the lead wire's blue and black or brown lines are connected to the power supply, the drive wheel begins to turn smoothly or in reverse.

2. At the same time, rotate the drive sleeve in the same direction as the driving wheel until it stops rotating. When the drive sleeve is reversed, the drive wheel resumes rotation in the original direction.

3. Repeat the previous step until the drive wheel stops rotating, indicating that the rotational direction has been restricted.

4. Now reverse the wiring so that the drive wheel rotates in the opposite direction.

5. Mark the outer circle of the drive sleeve, and rotate the drive sleeve and the drive wheel in the same direction until the drive wheel stops, and the number of revolutions of the drive wheel in the two limits equals the number of revolutions of the drive sleeve.

6. When the limit control stops the drive wheel from rotating, the drive sleeve must not continue to rotate according to the current number of revolutions, or the machine parts will be damaged.

7. If the motor is operational, the size of the motor drive wheel rotation can be adjusted using the adjustment direction indication located between the two travel adjustment knobs.

8. Before installation and use, the usercurtain styles predetermined a number of revolutions, which should be less than the actual working revolutions.

9. Then, with the limit closed, open that limit in the same direction as the start of operation after installation, and gradually adjust to the required limit position after installation.

How do I pick the ideal curtain color?

Consider whether you want your window treatments to stand out from the decor or blend in with it when choosing a curtain color. Choosing curtains that are comparable to the wall color or trim color of the room will help them play a more subdued role if that is your preference.

Why won't a roller shade remain up?

This most likely indicates that your cloth is too slack in the tube. Contrary to the prior solution, you should just lift your blinds all the way up, take it off its bracket, then manually roll it down to halfway. Once more, doing this should reset your blinds, after which they should continue to operate normally.

Is it important if the curtains are too large?

The width of the curtain should be twice or twice and a half times that of the window. This is because the curtain should be able to be drawn back past the window frame on either side to maximize light in the space and accentuate the size of the window, yet still appear full when drawn back.